Find or Sell Motorcycles & Scooters in USA

1978 Honda Cb on 2040-motos

US $4200
YearYear:1978 MileageMileage:31 ColorColor: White
Location:

Culpeper, Virginia, United States

Culpeper, Virginia, United States
QR code
1978 Honda CB, US $4200, image 1

Honda CB photos

1978 Honda CB, US $4200, image 2 1978 Honda CB, US $4200, image 3 1978 Honda CB, US $4200, image 4 1978 Honda CB, US $4200, image 5 1978 Honda CB, US $4200, image 6 1978 Honda CB, US $4200, image 7

Honda CB tech info

Engine Size (cc)Engine Size (cc):750 WarrantyWarranty:Vehicle does NOT have an existing warranty TypeType:Cruiser

Honda CB description

Here's my 1978 Honda CB750 "Lucky No. 7" Cafe Racer. Just got it back from the shop. All major work done by Geoff Godfrey at Zebra Racing in Bealton-Virginia  The bike was completely stripped down and the frame was de-burred and then powder coated a lustrous black (double layer). The engine was tightened up, serviced, tuned and then detailed, with a chrome valve cover and custom chrome valve tappets. Engine runs very smooth with lots of power. NGK plugs and K&N pod air filters. Carbs are synched perfectly. Starts on the very first try every time. The electrical was completely stripped and replaced with new wiring and a new battery. All nuts and bolts were replaced with high quality stainless steel ones. The front forks were rebuilt and powder coated, and the handlebars were replaced with a lower profile set.  Front brake caliper rebuilt as well. Custom 4 into 2 chrome exhaust. Quiet until u get out on the road and open her up, but not annoyingly loud. Custom oil pressure gauge installed on the right side of the engine. Original gauges restored by Joel Levine Company in Lafayette-Georgia. The gas tank is an original and rare 'breadbox' CB750 Super Sport tank with custom knee cutouts done by Dave Barker at SpeedMetal out in Denver-Colorado. Custom seat, with built in red running light at the very rear. Bright LED brake lights built into the frame underneath. Illuminated license plate as well. Electric and kick start. No turn signals. Horn works, along with the high and low beam headlight. Clean Virginia title. Engine is original to the bike.

This bike is old school technology and some modern additions, with an emphasis on clean lines and excellent performance. This bike is perfectly balanced, does not shake or rattle, and will do 110 MPH without any effort. Just remember, the breaking technology is still from the 1970's, so if there were an additional upgrade that should be done, it would be the addition of dual disc brakes. The bike wheels are also original and showing their age, but have been cleaned up and polished, with an addition of a red pin stripe.

There are a few minor scratches here and there, but otherwise the bike is in excellent condition. This has been a 4 year labor of love that has finally culminated in what u see in the photos. I don't expect to get all of my monetary investment back from this project, but I'm also not going to just let it go for nothing. No reserve.

No international sales. US sales only. Shipping is the responsibility of the buyer, although I can assist with any loading when it comes time for the pick-up. UShip has been a very good option for me in the past, so I would recommend them. 

Moto blog

Stoner Tops Day One of Sepang Test – Video

Tue, 28 Feb 2012

It’s been about a month since Casey Stoner last tested the Honda RC213V racebike at Malaysia’s Sepang circuit but the defending World Champion remains the man to beat, setting the fastest lap at the first day of MotoGP’s February Sepang test. Heavy rain limited teams’ testing and Stoner only completed 16 laps but still managed to set a time of 2:01.761. Stoner was the only rider to lap under 2:02, though his Repsol Honda teammate Dani Pedrosa came close with a time of 2:02.005 while completing 36 laps.

Honda RCV1000R MotoGP Production Racer Revealed

Thu, 07 Nov 2013

Honda Racing Corporation officially introduced its new RCV1000R production racer which will be sold to racing teams hoping to compete in MotoGP‘s new “Open” prototype class. The RCV1000R is based on Honda’s RC213V factory prototype, with the same chassis and a similar 90° V-4 engine claiming more than 234 hp at 16000 rpm. The key difference is the engine uses traditional spring valves whereas the valves on the RC213V are activated pneumatically.

Casey Stoner To Be Named MotoGP Legend

Fri, 11 Oct 2013

There’s no question Casey Stoner was (and still is) one of the best riders ever to throw a leg over a motorcycle. His accomplishments on two wheels, especially his championships on both Ducati and Honda machinery, are proof. Next week at the MotoGP round at Phillip Island in Australia, Stoner will join a distinct group of riders as he will be officially inducted into the MotoGP Hall of Fame.