Find or Sell Motorcycles & Scooters in USA
  • 1969 Honda CB1969 Honda CB (1969)
    1969 CB750 sandcast low reasonable starting price and buy it now.Matching number: VIN number 1005907, Engine number 1005418 I bought it a few years ago and started working on it but now because of back pain I am not able to finish it so it must go to another fan of sandcast guy to bring it to the perfect condition. It was sitting for years when I bought it, I cleaned it, Changed oil and filter, cleaned carburetors and changed gas lines and used another portable gas tank and start and now it runs but needs a little synchronising on carburetors. No Battery.Fron caliper is professionally rebuild and painted and come with bike as you see on pictures some missing mounting bolt and screws. it has regular ignition switch but will come with receded switch and key that shown on pictures.left hand mirrors part is broken as shown on pictures. side covers and light head bucket and ears are repainted but gas tank has its own previous paint. Inside wrinckle gas tank is nice and free of rust. Not noticeable rust. duck tail seat. double cut fender has a little bend on end part needs to be fixed.I changed on this bike handle bar since it was not original to the bike and also short chain guard. Air box has no crack or repair and will come with bike. It has 4 in 2 very nice exhaust pipes so I did not change it. I have 4 NEW never used no number exhaust pipes from Yamiya in Japan in the box as you see in pictures NOT INCLUDED ON THIS AUCTION.
    2016-07-10 04:44:40
    Wayzata, Minnesota, United States
    22
    14,500.00
  • 1971 Honda CB1971 Honda CB (1971)
    UP FOR SALE FROM MY COLLECTION A 1971 HONDA CB750 K1  THE 1971 HONDA CB750 K1  I have ridden this bike regularly and I can assure you, I would not be afraid to ride this bike anywhere, any distance. Needless to say, this bike brings ton of attention and great memories to all bike lovers. I bought this bike from the original owners estate a few years ago.I had a master Honda mechanic go over it completely and do a top end also had the body set professionally repainted proper candy Ruby Red.
    2016-06-15 04:43:31
    Lutz, Florida, United States
    19
    10,500.00
  • 2013 Honda CB500F 2013 Honda CB500F (2013)
    IN STOCK-GREAT FINANCING - Stripped-down, street fighter persona, combined with an easygoing character. That???s the all-new Honda CB500F, which begins with the same strong 470 cc liquid-cooled parallel-twin engine and sporty chassis as its CBR cousin, then adds a big helping of in-your-face attitude. Its ???naked???
    2013-12-18 22:14:59
    Tampa, FL
    0
    Call for Price
  • ***1971 Honda CB450******1971 Honda CB450*** (1971)
    ***1971 Honda CB450*** This bike was torn down to the bare frame and given a complete cosmetic make-over including powder-coating the frame and fenders, battery box, air-box, seat pan, tail light bracket, triple tree, and all other miscellaneous parts that were removed from the bike.  All body work was color-matched as close to the Candy Glory Red as possible and received three coats of paint and six coats of Candy Clear.  The stripe is painted and clear coated as well, not a sticker!  All work was completed by Resurrections by Ray here in Mercer, Pa.   The tires are BRAND NEW and have less than 10 miles on them.  Starter was rebuilt as well.  It will need some minor adjustments to the valves as they tick a little when the bike warms up.  The bike runs great, goes through all the gears with no issue, all the electronics work as they should, and there are no wobbles, shimmies, or shakes. The fork boots and seat cover are new and I will include the strap and buckles for the seat with the bike.  I have thousands of dollars invested in this restoration.  If you are looking for a bike to professionally CafĂ©, this would make a great candidate-JUST LOOK AT IT!
    2013-10-21 00:15:44
    Mercer, Pennsylvania, US
    14,520
    2,010.00

Honda CB Price Analytics

Moto blog

Honda has applied for a European Vehicle Type Approval for a new model

Fri, 06 Aug 2021

Earlier this year, a Japanese company patented the name and layout of the new NT1100 model. A while later, renderings of what a sports touring car with the engine and transmission from the CRF1100 Africa Twin might look like appeared on the network. Since then, no new information about the appearance of the NT1100 has been leaked, but just the other day it became clear that the model will be presented soon.

Honda has unveiled the 2022 CRF450RX

Fri, 04 Jun 2021

There are no crutial changes, the manufacture's engineers, with the help of factory racers, were fine-tuning the motorcycle. As a result, the enduro CRF450RX, like the cross-country CRF450R, received a retuned electronic engine control unit, as well as recalibrated shock absorbers, which had a positive effect on enduro handling.

Honda has announced plans to go completely zero-emission

Sun, 30 May 2021

The company President Toshihiro Mibe said that Honda is committed to being completely carbon-neutral across all of its products. To do this, the company is expanding the range of electric vehicles and has also developed a standard for replaceable batteries Honda Mobile Power Pack.

Looking forward to the NX200 - Honda's new touring enduro

Thu, 06 May 2021

It will be a real adventurer, only a small one. The motorcycle will focus on the Asian markets. These isn't much information about the bike yet, but it is preliminary known that it will be built on the CB190 platform and will receive a single-cylinder engine with a displacement of 184 cc.

The other day, Honda patented the name and layout of the NT1100 motorcycle

Fri, 12 Feb 2021

The Africa Twin parallel twin will be installed in another chassis - an asphalt tourist one. Unfortunately, at the moment there are no official pictures, only the fantasies of fans and third-party designers. Only one thing is clear - the engine will be 1100cc, and just like the CRF1100 Africa Twin touring enduro and CMX1100 Rebel chopper, the engine will be offered with both a conventional motorcycle foot-shift gearbox and a DCT robot.

Honda has updated its flagship GL1800 Gold Wing tourer for 2021

Tue, 19 Jan 2021

There are no radical changes, improvements have affected parts of Honda tourers that are important for ensuring the comfort of the rider. In addition, new color and graphic schemes have appeared for the 2021 models. The Tour version has Gunmeatal Black Metallic and Candy Ardent Red.

Honda introduced the European version of the MSX125 Grom 2021 model year

Sat, 12 Sep 2020

The legendary microbike received an engine that complies with Euro5 standards and significantly upgraded looks. In addition, the MSX125 will now also be sold under its own name Grom on the European market. Honda Grom received an updated 125cc single-cylinder engine with 9.6 horsepower, aggregated with a five-speed gearbox instead of the previous "four-speed".

Honda will introduce the new CBR600RR later this year

Wed, 08 Jul 2020

There has been no official information from Honda about the new generation CBR600RR yet, but it became known that the 2021 model will echo the older Fireblade in terms of its exterior. The "Six hundred" will receive a "two-eyed" LED head optics, the air intake will be located in the middle. Winglets will be added to the fairing to increase downforce at high speeds.

Honda has patented a technical solution from the arsenal of the Gold Wing tourer.

Thu, 02 Apr 2020

The modern Honda Gold Wing is equipped with a double wishbone front suspension, which not only increases ride comfort, but also allows the geometry of the motorcycle not to change during acceleration and braking. Lever suspension, which stabilizes the bahavior, may appear on other models of the company in the future. This is hinted at by patent images of similar systems integrated into the design of completely different motorcycles - the “classic” CB1100 and the small-capacity C125 Super Cub.

Little brother: Honda introduced a "nano version" of the X-ADV scooter

Sun, 11 Aug 2019

The model is called ADV 150 and, despite its similarity with the X, it has nothing to do with it. The engine is a single-cylinder with a volume of 149.3 "cubes", developing 14.2 hp at 8500 rpm and 13.8 Nm at 6500 rpm. Suspension is a regular telescopic fork and two Showa rear shocks.