1975 Kawasaki Z1 900,z1,kz,dragbike on 2040-motos

US $2,026.00

Year:1975 Mileage:100000 Color: Blue

Location:

Hubbard, Ohio, US

1975 Kawasaki Z1 900,Z1,KZ,Dragbike, US $2,026.00, image 1

Kawasaki Other photos

1975 Kawasaki Z1 900,Z1,KZ,Dragbike, US $2,026.00, image 2

1975 Kawasaki Z1 900,Z1,KZ,Dragbike, US $2,026.00, image 3

1975 Kawasaki Z1 900,Z1,KZ,Dragbike, US $2,026.00, image 4

1975 Kawasaki Z1 900,Z1,KZ,Dragbike, US $2,026.00, image 5

1975 Kawasaki Z1 900,Z1,KZ,Dragbike, US $2,026.00, image 6

1975 Kawasaki Z1 900,Z1,KZ,Dragbike, US $2,026.00, image 7

Kawasaki Other tech info

Type:Standard Engine Size (cc):903 Warranty:Vehicle does NOT have an existing warranty For Sale By:Private Seller

Kawasaki Other description

UP for auction/sale today is my 1975 Kawasaki Z1 900 that I built to run out at my local tracks.This has been a very good bike to me but it's time to move on.The bike runs 12.00 to 12.10 very consitent depending on your shift point.Mine was about 8000 and leaving the hole at 4000.The motor is a stock 903cc cylinder and pistons,head is a stock 903cc with hollow Z1 900 cams,cases are Kz1000 bored for a big block so it has room to grow,main bearing support,crank has been welded,and transmission has been back cut.Has a A.P.E. manual cam chain tensioner,A.P.E. clutch pusher.Has a shift light and electric over air shifter.The shift cylinder is not on it in the pictures but it goes with it.The carbs are stock with 122.5 main jets.It has a rare 4 into 1 DENCO TRICONE and the sound that it makes is like no other.The pipe has a dent on bottom of the tail pipe which can't be seen but just wanted you to know.The front forks,fender,caliper,and wheel are Kz1000.The frame and swing arm are 100 percent Z1 900 that has not been cut or welded on.The rear fender,headlight,headlight ears and foot pegs were all powder coated almost chrome.The gearing on it now is setup for the street which is 15/35 when I had it at the track it was 14/37.The speedo is hooked up but the needle bouces.The tach is not hooked up the shift light has a built in tach.The wiring is basic with working head light,tail light,brake light,and charging system.THIS BIKE IS KICK START ONLY!Tires are like new Kenda Challengers.It has a rip in the seat and some staining as shown in picture.Bottom of seat pan could use some cleaning up as shown in picture.Has a couple scratches and chips in paint as shown in pictures.Has a ding in head light and small holes in ears as shown in pictures.Head has a couple broken fins as shown in pictures.Mileage on bike is unknow when I bought the frame back in 2008 the mileage on title is 12,500. I do have a reserve on this bike and have the right to end auction early because it is for sale local as well.If I forgot something please feel free to ask. Thanks and have a great day.

Kawasaki Other for Sale

Kawasaki ltd 900 z-1 kz900 kz900ltd(US $2,500.00)
1984 kawasaki kz 700 kz700 a1 one year only rare low miles(US $1,025.00)
1980 kawasaki kz1000 kz 1000 shaft(US $710.00)
Zl1000 eliminator for parts(US $1,200.00)
1984 kawasaki gpz750 turbo 'no reserve'(US $1,000.00)
1978 kawasaki kz650b 'no reserve'(US $1,000.00)

Moto blog

AMA Supercross: 2012 Phoenix Results

Mon, 16 Jan 2012

Ryan Dungey gave KTM its first ever AMA Supercross win, taking the holeshot and leading every lap in Phoenix, Ariz. With an audience of 49,236 watching at Chase Field, it was the field that had to chase Dungey during the main event. Dungey jumped out in front at the first corner followed by JGRMX Yamaha‘s Davi Millsaps and defending AMA Supercross Champion Ryan Villopoto of Kawasaki.

Isle of Man TT 2013: Lightweight TT Race Results

Fri, 07 Jun 2013

James Hillier set new lap time and race time records in a dominating victory in the Lightweight TT race for the 2013 Isle of Man TT. All three of the Kawasaki rider’s lap times were faster than the previous lap record for the Lightweight TT class, for a record overall time of 57:42.245 and average speed of 117.694 mph. The race started with another Kawasaki rider (the class is dominated with Kawasaki Ninja 650s with a few Suzuki SV650s) Dean Harrison taking the early lead through the Glen Helen viewpoint but Hillier was right on his tail about half a second behind.

K-Tech release 25SSK for Big Piston Forks

Mon, 21 May 2012

K-Tech have released their popular 25SSK front fork open cartridge system to fit all Showa Big Piston Forks. Here's what K-Tech have to say about them: These lightweight aluminium units are supplied to the same exacting specification as all other 25SSK fitments with 14mm piston rods and a 25mm cartridge tube, the 14mm piston rods displace a large volume of oil through the 25mm control pistons giving enhanced damping characteristics over the standard Big Piston Fork and allow a bigger volume of air for a more precise feel at the bottom of the fork travel. The cartridge kits have compression and rebound adjustment in both legs and are supplied with 1.5mm Flow Control Valves for a more accurate adjustment, all necessary hardware is supplied to convert the Big Piston Forks to take the cartridges but it is necessary to order the springs you require as these are not included, customer price for the 25SSK cartridges is £725.00 + VAT and are available for the following models:- Honda CBR1000RR 2012 Kawasaki ZX6-R 2009-2012 Kawasaki ZX10-R 2011-2012 Suzuki GSXR600 2011-2012 Suzuki GSXR1000 2009-2012 Contact K-Tech on: +44(0)1283 559007.