Find or Sell Motorcycles & Scooters in USA

Pro Street Pro Street Motorcycles in Michigan

  • 1994 Custom Built Motorcycles Pro Street1994 Custom Built Motorcycles Pro Street (1994)
    Ron Finch custom turbocharged motorcycle. Built in 1994 at a cost of 45,000. Low Mileage (Approx.
    2016-11-29 04:44:10
    Center Line, Michigan, United States
  • 1997 Custom Built Motorcycles Pro Street1997 Custom Built Motorcycles Pro Street (1997)
    Ron Finch custom supercharged motorcycle. Built in 1997 at a cost of 45,000. Low Mileage (Approximately 5000) .
    2016-11-29 04:44:08
    Center Line, Michigan, United States
  • 2005 Custom Built Motorcycles Pro Street2005 Custom Built Motorcycles Pro Street (2005)
    "Twisted" A supercharged softail by Dave Wiegand Vehicle Description 2005 Custom Softail 190 + horsepower, fabricated and assembled by Dave Wiegand, owner of The Motorcycle Shop in Rochester Hills, MI (248) 852 9944. 100 Cubic Inch S&S Modified Engine. Six speed RSD transmission.
    2016-08-23 04:52:01
    Rochester, Michigan, United States
  • 2004 Custom Built Motorcycles Pro Street2004 Custom Built Motorcycles Pro Street (2004)
    2004 Custom Built Soft Tail. 107 S&S Motor. Dynod at 110 HP at rear wheel Jims 5 speed trans Rolling Thunder frame 230 rear tire RC Components Wheels Performance Machine Brakes Stainless Rotors New Front Tire New Battery Super Trap Exhaust 2 up seat with passenger pegs Powder Coated Frame Silver Pearl Metallic Custom Paint with Flames   This is a beautiful custom built soft tail with a 107 S&S motor.
    2016-06-24 04:57:19
    Grand Blanc, Michigan, United States
  • 2009 Custom Built Motorcycles Pro Street2009 Custom Built Motorcycles Pro Street (2009)
    Up for bid is my Johnny Pag Pro Street custom look cruiser. Well kept and runs great Sounds larger than it is because of the drilled bafflesExcellent for a relaxing cruise or some bar hoppingSelling because I don't ride it much. MOTIVATED SELLERAll of Johnny Pag's bikes are built very well.
    2016-06-17 05:04:28
    Hudson, Michigan, United States
  • 2001 Custom built motorcycle2001 Custom built motorcycle (2001)
    2001 Custom Built Motorcycle.  All Good Parts.  Performance Machine calipers, American Wire Wheels 80 spoke rear 100 spoke front, Hurst Controls, Avon Tires, Subaki Chain, All Balls Starter, 100 CI Revtech Motor, Whimmer Intake.  Very, Very Clean...Won't be disappointed!!  Perfect Bike! Any further questions or more details about bike, best to call me (Nick) on my cell 269-767-1210.  Thanks and happy bidding:)
    2013-10-22 00:57:53
    South Haven, Michigan, US
    I bet you don't have one of these, or have one of these in your town or maybe state. This is a Euro Pro Stock bike that is a tribute to the awesome bikes built and engineered by Marcus Walz.  It is a one of a kind and if you want something very unique for your collection, or to be noticed anywhere you go ........ here is your ticket.  The unique thing about this bike is it blows people away who know nothing about motorcycles, go ahead and show the pics and video to guys who aren't bikers, and ask them about what they think of the bike.  It is a Euro Pro Stock Malibu Motorcycle Works roller with a 300mm single sided swingarm, air ride suspension with 50mm carbon fiber wrapped forks, brand new 100 inch 4x4 96HP RevTech, 6 speed RSD BAR racing transmission and BDL belt drive.  Full sheetmetal molded body and a very cool RF Chip ignition system that does not have any key involved.  Just touch the fob to the pickup sensor on the right side of the battery box and "click" full power on, touch it again and "click" it shuts off.
    2013-10-22 00:25:17
    Bloomfield Hills, Michigan, US
  • 2013 Custom Build Bike - All The Best Parts! Arlen Ness - Baker - NO RESERVE!!2013 Custom Build Bike - All The Best Parts! Arlen Ness - Baker - NO RESERVE!! (2013)
    This bike was assembled back in 2006 and has spent most of its life in a heated showroom. It has 106 miles on it. - Motor - Merch Performance Stage 2, 125 cu.
    2013-10-17 00:39:40
    Kalamazoo, Michigan, US
  • Custom Built 1998 Kenny Boyce Pro Street Harley...124Custom Built 1998 Kenny Boyce Pro Street Harley...124" S&S Super,Baker 6 Speed (1998)
    1998 Kenny Boyce Pro Street frame,S&S 124 " Super Sidewinder 2003,Baker 6 Speed,Boyd Coddington Wheels which are very rare16" front and 18"rear,Arlen Ness Controls,Primo Belt Drive,Progressive Shocks,S&S Shortie carb,Vance and Hines 2 into 1 header with a pro pipe,Electronic dash,Performance Machine Brakes,Single fire ignition,Jay Brakes foward controls,Headwind headlight,Braided lines throughout,Ceriani Inverted front forks.Very nice bike never titled.Reciept for frame,engine and trans provided,we are a authorized dealer.For more info or questions please call Andy at (586)727-3697.Motorcycle was completed in 2008 and is ready to ride.Runs very strong.
    2013-10-02 12:43:27
    Richmond, Michigan, US
  • 2005 CUSTOM BUILT MOTORCYCLE * S&S 124 CI Super Stock Motor2005 CUSTOM BUILT MOTORCYCLE * S&S 124 CI Super Stock Motor (2005)
    2005 CUSTOM BUILT MOTORCYCLE * S&S 124 CI Super Stock Motor * Approximately 125 Horse Power * 6 Speed Primo Rivera Transmission * Primary Belt Drive * 103 long * 240 rear tire * Excellent condition *$30,000 OR TRADE On May-30-13 at 11:02:36 PDT, seller added the following information: SAVE MONEY ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. Learn More SHIPPING PRICE ESTIMATOR Delivery ZIP Code: Item Weight: lbs.
    2013-10-14 00:06:52
    Roseville, Michigan, US
  • 2003 Custom Assembled Motorcycle - Harley Davidson Aftermarket Parts.2003 Custom Assembled Motorcycle - Harley Davidson Aftermarket Parts. (2003)
    I’m getting old and it’s time for my “ZROD” to go.  I built this bike 10 years ago and every couple of years I would work on something for her.  Paint, engine, tranny, frame, lights, ect.  You can read the attached appraisals and the pictures really show the work in this bike.  The Ultima 127” engine with a custom dual Ultima R1 carb’s is matted to a Baker “Torque Box”. 3”BDL Primary to a 530 Chain final drive with a Russell Mitchell “Sprotter” brake setup on a 17" x 200mm rear tire.  The front end is a Pauco 4” over Springer front end with a Wind Vest fairing on a 21" front tire.  Handle bar controls are Arlen Ness with Bad Lands Mirrors.  These are the mirrors that have the gages in them.  The chin spoiler is also a 3.5 quart oil tank.  I’ve never seen the temperature above 220° The Exhaust is Thunderheader that I added an O2 sensor to.  The readout is under 1 of the speaker covers on the dash.  The other speaker cover is blank. (no speakers either – I was going to add them, but the bike is too much fun)  It has the Legends air ride setup on the Pro-one 4 link rear end.  The transmission utilizes the Baker built-in ignition kill switch for FULL-THROTTLE shifting by foot or Jockey.  The Rat Fink even lights up.  There are (2) 300cca batteries under the seat to roll the motor over using the 2.4KW starter.  Be very clear that this bike is fast.  It’s not for beginners!!!!  In the right hands you’re the king of state.  I’ve dyno’d it at over 120 HP to the rear wheel and have run a 10.7 sec ¼ mile on the Teressi Dyno Drags.
    2013-09-30 10:43:29
    Homer, Michigan, US
  • 2005 Saxon Firestorm, Pro Street Custom Softail2005 Saxon Firestorm, Pro Street Custom Softail (2005)
    2005 Saxon firestorm, Prostreet model, excellent condition. Soft tail, S&S motor, 6 speed trans, 250 rear tire, belt drive runs strong, runs great. Displacement 96 ci; 1566cc, Electronic Ignition, Frame Stretch 0" downtube, 4" backbone, Speedometer Digital with integrated tach Rake 40° neck 5° tree; 45° $ 14,000
    2013-09-03 22:02:54
    Owosso, Michigan, US
  • 2009 Johnny Pag Pro Street Custom Motorcycle2009 Johnny Pag Pro Street Custom Motorcycle (2009)
    Very nice custom bike from Johnny Pag. Selling because I am looking to get a moped/scooter instead and pay a few bills. Runs like new.
    2013-09-03 11:08:42
    Hudson, Michigan, US

Pro Street Pro Street Price Analytics