-
2013 Pro Street Custom (0)
2013 Pro Street Custom for sale in West Hartford, Connecticut 06119 This is a great 2013 Pro Street Custom Motorcycle has a 114ci engine - This is 1 of the nicest custom 1 of a kind bikes you will see outside of American Chopper! Soft tail Bike, 2 in frame tubing. $54,000 Invested Features Include: Rear tire size: 300 Engine: 114 Cubic inch Ultima, polished chrome finish Transmission: 6 gear, right side drive 5in Belt Drive Open Primary 40 Degree Rake This is a bike designed for shows or for cruising.
2014-01-27 04:00:24
0
35,000.00
-
2004 Pro Street Custom (0)
2004 Pro Street Custom For Sale In Dodge Center, Minnesota 55927 This 2004 Pro Street Custom Is A Beautiful Bike, 124ci S&S, 6 gear trans, Dakota Digital mirrors, 250 rear tire, wide belt drive, soft tail. Welcome to Select Vehicle Marketing Visit us anytime at http://www.selectvehiclemarketing.com The Nations Premier Marketplace of For Sale By Owner, Private Party Listings of Cars, Trucks, R.V.s, Boats, Motorcycles, Airplanes and all types of Motorsports and Heavy Equipment! Select Vehicle Marketing was founded by several pioneers of the Internet's Digital Marketing Industry!
2014-01-27 03:55:03
1
24,000.00
-
Pro Street Chooper (2009)
2009 Godfather 300 Softail Frame 300 Tire Single Down Tube, $25,000 OBO, Polished RPM Forward Controls, 40" Steel Woven Brake Line, 26" Steel Woven Brake Line, 34" Steel Woven Brake Line, Braided Gas/Oil Line 3/8 ID, 38" Barnett Throttle Cable SS 96 & up 90* fittings, 38" Barnett Idle Cable SS 96 & up 90* fittings, 64" Barnett Clutch Cable Stainless with clear coat 96 & up adjuster in center, Martin Brothers Right Side Drive Daisycutter Pipes, 113" Polished Ultima Engine, S&S Super G Carb, Polished 6 Speed RSD Cable Transmission, SMW INC BILLET CELTIC BELT DRIVE ASSEMBLY WITH OUTBOARD BEARING SUPPORT GOODYEAR 85MM WIDE BELT, Chrome Points Cover, Dakota Digital Mini Digital Speedometer, 40deg. rake. Just over 1000 miles, all of the kinks are worked out of this bike.
2014-05-27 18:53:54
Aberdeen, North Carolina, United States
1,000
23000
-
2011 custom Harley Davidson softtail (2011)
condition is in like new .all though many imperfections ,as that is the type look I was after when building .the bike is tabbed and passes all Washington State requirements and a file receipt history come with. 100 0/0 legal dot approved in the US.
2013-08-31 00:55:03
Anacortes, Washington, US
499
8,000.00
-
2010 CUSTOM PROSTREET CHOPPER MOTORCYCLE CUSTOM PAINT (2010)
Here is a 2010 custom chopper built out of Daytona Beach Florida, Arlen Ness rigid frame and polished chrome brake rotors , has a 1700cc Roadstar crate motor with the BIG BORE kit with upgraded cam and push rods making it 1796cc. sounds very mean, New Drag bars, new stainless polished brake rotors, new 250 rear tire and front, custom red chain new front forward controls, drag pipes and much more. Lots of custom work put into this bike, killer skull and web candy paint.
2013-10-20 00:02:23
2,500
2,938.88
-
BEAUTIFUL 05 SAXON SOFTAIL-WITH TRU-FIRE FLAMES-TWIN CAM MOTOR (2005)
I JUST FINISHED THIS CLEAN LITTLE BIKE..RUNS AND RIDES GREAT!! SOUNDS VERY NICE THRU THOSE LONGSHOTS!! MOTOR IS A FRESHENED UP 03 TWIN CAM...NEW CAM TENSIONERS..ADJUSTABLE PUSH RODS,ECT...ALL NEW IGNITION..BATTERY....PAINT IS EXTREMELY NICE...JUST A HINT OF TRU-FLAME....NOT TOO MUCH...LOOKS BEAUTIFUL!!
2013-09-05 08:25:51
Apache Junction, Arizona, US
5,200
3,500.00
-
2002 Custom Built Motorcycles Pro Street (2002)
Do not let the bike of your dreams pass you by! This bike is custom built to look good and ride fast. Runs Great!
2016-07-25 04:57:29
Arlington, Tennessee, United States
4
19000
-
2006 MGS "PRO STREET" CHOPPER - SHOW WINNER!!! (2006)
This is a 2006 MGS PRO STREET CHOPPER. It was built with no expense spared. Absolutely amazing bike! here is a list of some of the bike's features :
Lowlife frame with MGS molded down tube
MGS tank, fenders, pipes, and molded rear parts
Legend air ride suspension
121" TP Engineering "PRO SERIES'" engine
Baker six speed trans ( belt drive)
Accutronix & PM hand and foot controls w/hydraulic clutch
Headwinds headlight
Custom Airbrushed paint with candy red base coat
Danny Gray Croc seat
Custom one off wheels
21" front 18" rear with a 300mm tire
speedo/ odometer gauge built into bars
hidden wires and more...... --------OVER $ 65k when built--------
Bike is All Chrome and airbush. NEEDS TO BE SEEN IN PERSON TO APPRECAITE IT!!
2013-09-03 09:48:48
Atascadero, California, US
1,500
32,000.00
-
2016 Custom Built Motorcycles Pro Street (2016)
electronics for drag motorcycle
2016-11-02 04:43:12
Atlanta, Georgia, United States
0
375.00
-
2011 Custom Built Motorcycles Pro Street (2011)
After a professional career as a mechanical engineer and two US patents, I designed and built this vehicle from scratch over a period of ten years for my own personal pleasure. Time didn't mean anything and neither did money. Although I never intended it to be a show vehicle, innovation and attention to detail have brought recognition and awards in national shows. The unique front suspension with single-sided swing arms, classic "dressed-up" small block Chevy with it's front distributor and three deuces, late model Corvette transaxle with aluminum rear suspension all packaged in a swept-back layout are crowd pleasers. It's long wheelbase and wide stance coupled with a very low center of gravity and 400 horsepower make for a comfortable but addictive ride. Condition is excellent. All photos taken on grass April 28, 2016 to show current condition. The time has come to sell. Features:
creative design for mounting a single square automobile tire up front
front air suspension with complete on-board air system
1:1 steering between handlebars and front tire
frame is TIG welded by a professional welder
fasteners are stainless steel with exceptions in unique situations
bed plate protected by non-metallic washers on all fasteners
front wheel is OEM forged Corvette C5
motor is 1972 4-bolt main 400 small block bored out to 406 cu.
2016-06-14 16:02:17
Austin, Texas, United States
1
23000
-
2006 Custom Built Motorcycles Pro Street (2006)
Call to work out details
2016-06-22 04:59:56
Awendaw, South Carolina, United States
5
7,500.00
-
Bad a$$ Pro Street Chopper (0)
2006 custom built PRO STREET CHOPPER. Soft tail with only 8k miles. Best of everything with no expense spared.
2014-01-22 04:22:27
8
17,500.00
-
2001 Custom Built Motorcycles Pro Street (2001)
2001 DONNIE SMITH CUSTOM CUSTOM Top Line Information
Year:
2001
VIN:
MVIN206691IND
Make:
DONNIE SMITH CUSTOM
Stock:
A1118
Model/Trim:
CUSTOM
Condition:
Pre-Owned
Engine:
0 cc
Exterior:
Purple
Mileage:
5,246
Additional Photos* * * Click Photos to Enlarge * * *
* * * Click Photos to Enlarge * * *
Phone: (630)425-3237
Alt: (630)624-8303
DescriptionDONNIE SMITH CUSTOM!! DONNIE SMITH CUSTOM
S&S MOTOR
HYPERFORMANCE BIG JUGS
5-SPEED TRANS
ONLY 5246 MILES!! PM CALIPERS
CUSTOM 2 UP SEATS
JOKER MACHINE CONTROLS
OPEN BELT PRIMARY
CUSTOM SKULL AIR BRUSHING
At our dealership we work very hard to accurately describe our vehicles through text descriptions and elaborate photos.
2016-10-05 04:47:14
Batavia, Illinois, United States
5
10,999.00
-
Harley Custom Chopper (2008)
Up for auction is a custom built Harley Softtail. The bike starts, runs and drives as it should. It only has 600 miles on it since the build.
2013-10-01 21:41:47
Bechtelsville, Pennsylvania, US
600
7,088.77
-
2006 Custom Built Motorcycles Pro Street (2006)
You are viewing a super sweet sharp trike built by Saxon.Saxon is a company that builds a limited number of custom bikes a year in the USA.This is forsure a bike to ride or take to local bike shows.Trike is super nice with very little wear. If this is what you are after dont let this pass you up lots of money in the Bad Boy..... WE ARE POLARIS OF BENTON.
2016-08-06 04:52:56
Benton, Kentucky, United States
7
14,250.00
-
2006 Custom Built Motorcycles Pro Street (2006)
2006 M109r. Custom paint with skulls and gost flames. Custom fairing with 9" flip out DVD screen.
2016-06-17 05:04:30
Bessemer City, North Carolina, United States
23
13,500.00
-
2005 Custom Built Motorcycles Pro Street (2005)
You are bidding on a full custom built by Independent Cycles east and hotrod builder Jimmy Little. All steel body
Frenched in tail lights
Stainless exhaust
All lines are stainless
Legend lowlife frame
Air ride front and rear
S&S 124
Custom air Girder frontend
Digital gauge
Custom hand controls
Blinkers
Hyd clutch
Hidden wires
If buy it now is used free shipping . Bike has been stored indoors for 5 years and hasn't been fired in 1 year .
2016-10-19 04:42:38
Blanchardville, Wisconsin, United States
2
18,650.00
-
2006 Custom Built Motorcycles Pro Street (2006)
You are bidding on a 1 of a kind custom Ballistic motorcycle that has been sitting in a game room at a friends house since 2007 . When this bike was built in 06 is was among the elite builders of the time . This bike is turn key ready and if buy it now option is used shipping is FREE ..
2016-10-19 04:42:35
Blanchardville, Wisconsin, United States
150
27,500.00
-
CUSTOM HARLEY EURO PRO STOCK CHOPPER BOBBER WALZ RACE STYLE SOFTAIL (2013)
I bet you don't have one of these, or have one of these in your town or maybe state. This is a Euro Pro Stock bike that is a tribute to the awesome bikes built and engineered by Marcus Walz. It is a one of a kind and if you want something very unique for your collection, or to be noticed anywhere you go ........ here is your ticket. The unique thing about this bike is it blows people away who know nothing about motorcycles, go ahead and show the pics and video to guys who aren't bikers, and ask them about what they think of the bike.
It is a Euro Pro Stock Malibu Motorcycle Works roller with a 300mm single sided swingarm, air ride suspension with 50mm carbon fiber wrapped forks, brand new 100 inch 4x4 96HP RevTech, 6 speed RSD BAR racing transmission and BDL belt drive. Full sheetmetal molded body and a very cool RF Chip ignition system that does not have any key involved. Just touch the fob to the pickup sensor on the right side of the battery box and "click" full power on, touch it again and "click" it shuts off.
2013-10-22 00:25:17
Bloomfield Hills, Michigan, US
10
39,000.00
-
Custom 120 Cubic inch Arlen ness (2005)
Bike was built as a show bike for my shop. Only the best parts were used, all Arlen ness parts with S & S motor. Bike has never been titled and only break in miles on motor and trans.
2013-09-03 15:12:33
Bonney Lake, Washington, US
100
15,000.00
-
2007 SAXON VILLAIN PRO STREET CHOPPER (2007)
2007 Saxon Villain Pro Street Chopper...$14,000....MINT CONDITION, 3000 miles...$3500 Custom Chrome Gladiator rims, Brembo brakes...brand new outlaw helmet...P pad for 2nd rider...If you would like more info, pls email me and I will provide my cell number if you have additional questions...Thank you... VIN: 5XSST20477C000677
S&S 111ci Motor
Serial: GE05570
21" Front Rim
18" Rear Rim
300mm Rear Tire
Right Side Drive
6 spd Transmission
Soft Tail
2013-09-29 23:53:27
Boynton Beach, Florida, US
2,967
14,000.00
-
2010 Custom Built Motorcycles Pro Street (2010)
YES only 20 miles on this bike so its never seen the road. Looks much better in person. This bike is custom build for a Brest Cancer raffle held in 2010 from Richmond Va.
2016-08-03 04:57:24
Branford, Florida, United States
20
26000
-
Custom Pro Street Chopper (2007)
Custom built by the late Bryan Hagan of Iron Thunder Cycles. This bike was built to take to shows…has less than 700 miles on it!!!! War Eagle pro-street Wrath frame (soft tail)
Matte black finish Ultima 107ci motor
Dual profire coils
3” belt drive primary with custom cover
Braided copper lines throughout
Copper plug wires
240 rear tire
Adjustable swing arm shocks
Custom, one-off handle bars
Custom, one-off headlight
Odins mirrors
Incredible matching grips and pegs
Receipts totaling over $31,000!!!
2013-09-04 22:17:23
700
10,000.00
-
2009 Custom Built Motorcycles Pro Street (2009)
This is a rare chance to buy a one of a kind super bike 152 cubic inches of all billet motor with a six speed and clutch built specifically for this powerful motor the oil is in frame 260 rear tire has a couple chips from riding but very nice shape new battery and oil change
2016-10-18 04:43:33
Burlington, Wisconsin, United States
3
11,500.00
-
2014 Custom Built Motorcycles Pro Street (2014)
Typically old school custom motorcycles are fashioned around the older chopper design, as with
this machine, this is not the case. I spent close to three years from the conceptual
design thought process, to looking for right frame, running gear, power train to the finished
machine. The end result is a one of a kind that has incorporated the today modern technology to
arrive at an award winning design.
2016-08-26 04:57:52
1
55,000.00
-
06 Wild West Custom Chopper (2006)
2006 WIld West Dragoon. Excellent Condition, 128 Patrick Racing Motor, Jims RT side drive, Baker trans, all high end components, 300 Rear, 21" Front, 43 Deg Rake, drop seat, oil in frame, (has a very small leak under gooseneck) 7200mi. comes with manual, NADA lists @ 41K.
2013-09-05 08:25:42
Candia, New Hampshire, US
7,000
14,500.00
-
2017 Custom Built Motorcycles Pro Street (2017)
2007 Custom build
Built by Wiccid Sickles in Phoenix, Az
Titled as 2007 WCCDS. MODEL 2WICC LIST PRICE $25,995
96 cu. in.
2016-08-24 04:56:30
Casa Grande, Arizona, United States
1
9,600.00
-
Custom Built Motorcycles : Pro Street War Eagle 145ci (0)
2009 CUSTOM BUILT WAR EAGLE. This is a very rare drop seat Holy Frame. It is zero up and three out with a 45 degree neck.
2014-01-29 05:11:18
0
45,000.00
-
2003 Custom Built Motorcycles Pro Street (2003)
2003 Custom Softail. I have all the reciepts and Mso for this bike. Iowa Title.
2016-10-31 04:44:25
Cedar Falls, Iowa, United States
5
23000
-
1994 Custom Built Motorcycles Pro Street (1994)
Ron Finch custom turbocharged motorcycle. Built in 1994 at a cost of 45,000. Low Mileage (Approx.
2016-11-29 04:44:10
Center Line, Michigan, United States
5
12000
-
1997 Custom Built Motorcycles Pro Street (1997)
Ron Finch custom supercharged motorcycle. Built in 1997 at a cost of 45,000. Low Mileage (Approximately 5000) .
2016-11-29 04:44:08
Center Line, Michigan, United States
5
27126
-
1998 Custom Built Motorcycles Pro Street (1998)
1998 PRO STREET SOFTAIL 1340- 80CICARLINI DESIGN HANDLEBARS5 SPEEDCUSTOM PAINT SS SUPER E* CARBURETOR 180 REAR TIRE COOL BIKE STEAL OF A DEAL..
2016-11-23 04:50:02
Centre Hall, Pennsylvania, United States
3
6,000.00
-
1999 Kenny Boyce Pro Street Fxr (0)
100" S/S MOTOR. .625 Red shift cam. Super "D" carb w/ dual thunderjets.
2014-01-23 00:33:21
0
8,700.00
-
Kendall Johnson Custom's Pro Street 360 Motorcycle (2008)
Kendall Johnson Custom's Pro Street 360 Motorcycle
This is one the nicest pro streets out there. It has the following components:
2008 Eight Ball Manufacturing Pro Street Super Single Down-Tube Frame
145 cubic inch S&S engine with Dual Super G S & S carburetors and custom built intakes,
Diamond cut S&S cylinders and heads built by Kendall Johnson
Custom built stainless steel polished exhaust
Baker chrome 6 speed transmission with Barnett lock-up clutch
Barnett Scorpion fully polished belt drive
Custom hand built gas tank with recessed cap
Performance Machine hand and foot controls
Custom mirrors with oil, neutral, high beam indicator lights built in them
Air bag type air ride suspension for great ride and killer low stance
All lines and electronic wire are ran inside frame for clean look
All MSO’s for motor, transmission and frame
Custom made alligator seat by High Roller Cycle Seats
Copperhead Graphics custom paint & air brush (Candy brandy wine over silver with air brushed and marbled flames)
Red neon LED lights under tank with variable flash modes
Flush mount under paint turn signals in swing arm
23” Renegade front wheel
360 x 18" Rear Renegade wheel
This bike was professionally built by Kendall Johnson Custom's in Winston-Salem NC
The bike has only been test ridden and built with "Best In Show" winning quality. This bike is one of the nicest pro street bikes out there.
2013-09-28 11:37:15
10
16,100.00
-
2003 Titan Sidewinder Pro Street h` (0)
2003 Titan Sidewinder Pro Street
2014-01-22 01:55:18
0
24.00
-
2007 Custom Built Motorcycles Pro Street (2007)
2007 Pro Street made by RPM Custom Choppers. 96 S&S Super Stock engine, six speed transmission. I don't go many places without someone asking questions about this bike; it's an attention grabber It rides and handles great at highway speeds. This bike has been well maintained.
Email if you have any questions.
2016-08-13 04:53:11
Chelsea, Alabama, United States
4
37000
-
2007 Custom Built Motorcycles Pro Street (2007)
One of a kind 2007 RPM Custom motorcycle Low Dough, 96 S&S Super Stock engine, Six speed transmission. I cannot go many places without someone wanting to take photos and or ask questions about it. This bike is an attention grabber.
2016-06-14 16:03:07
Chelsea, Alabama, United States
9
36000
-
2006 Custom Built Motorcycles Pro Street (2006)
2006 Custom Prostreet Chopper C4 - 4000 miles. 113 cubic inch Ultima. Open belt primary, 250 rear tire, PM spun aluminum rims, Carlini handlebars, compression released heads, all aluminum is polished or chromed, too much to list.
2016-07-05 04:53:06
Chesterton, Indiana, United States
4
16000
-
2006 S&S motor, rev tech 6 speed, all custom parts (2006)
Jesse James front fender, Milwaukee Iron rear fender, Arlene Ness headlight, P M forward controls and throttle, custom wheels with matching rotors, custom paint job, leather and snakeskin seat, mini Dakota speed odometer . Built from the ground up must see to appreciate.
2013-09-29 14:43:44
0
9,000.00
-
Custom Built Motorcycles : Pro Street 2003 Wild West (0)
Showroom condition 2003 Wild West Vigilante.100+ horsepower engine, 240 rear tire, aircraft grade billet aluminum wheels, inverted forks, oil in the frame design, 1 1/4" riser handlebars, and six gear transmission.• S&S 107 cubic inch V-twin engine provides huge low-end torque and produces over 100 peak horsepower at the wheel• Vance and Hines Exhaust: Pro Pipe two into 1 with built in heat shields.• Baker 6 gear Right Side Drive, Andrews gears and shafts.• Proprietary drop seat frame with its massive 2" diameter backbone maintains the smooth lines of the motorcycle while providing a rigid structure for the steering, suspension, & drivetrain components.• 21" seat height creates a low center of gravity that increases handling and rideability. Corbin Leather Seat.• Oil stored in the frame with its large surface area helps cool engine oil as it circulates from the top to the bottom of the frame• Adjustable dampening mono-shock keeps the rear wheel in contact with the road, increasing stability• Mean Street Inverted forks keep un-sprung weight to a min, increasing front wheel response to irregularities in the road for a smoother ride• Performance Machine Billet aluminum forward controls & master cylinder provide smooth braking and shifting actuation along with enhancing the look of the motorcycle• Performance Machine four piston billet aluminum brake calipers provide precise and powerful stopping power• Stainless steel braided brake lines do not expand like traditional rubber lines so they transmit braking power directly to the caliper for consistent braking and highly sensitive feel•Performance Machine Billet aluminum wheels made of forged aluminum and machined with computer controlled milling machines are lightweight and rugged for max road holding characteristics and durability•Wind Vest windshield NO SCAMS!!! I will NOT pay any shipping fees up front.
2014-01-29 05:11:12
0
14,000.00
-
2001 Custom Built Motorcycles Pro Street (2001)
2001 confederate Hellcat, Now a 240R, Built by the largest and Best G1 Confederate Dealer in Cali.. Just Sold the Red 120 Merch America GT, This is Lowest Milage and Last Collector Bike That I have Left,
BEST EXAMPLE of a Hellcat in USA, Only listing One (1) Time, AND a "one (1) year Warranty Included",
"IF Bike Meets FIRST Reserve", A 12 Month LIMITED Warranty, With FREE Delivery UP to 300 Miles,
IS Included in the SALES PRICE (Above is Null and Void if Reserve Price is lowered during Auction),
Please, Please please have all the funds ready prior to placing a Bid, This Bike Sold New for Over 54K, AND
If you have Questions (after reading the entire add) Please Ask during First Four Days of the Auction ONLY,
For 55 Pictures "Large and Clear Pictures", of this Beautiful Bike, Go to my Photobucket Link:
http://s875.photobucket.com/user/irondoor19/media/2001Black240R/2000Black240R001.jpg.html?sort=3&o=0
LOWEST MILEAGE G1 Available ON EBAY, AND Best Condition, Better Than New,
Only a handful Made (6-8), THE 240R Hellcat Versus Standard Production Hellcat:
Hellcat Comes w 17" Front & Rear Wheels (17" x 3.5" Front, 17" X 6" 200 MM Rear),
240R has A Wider Swing Arm, Drive Gear / Housing for the Larger Rear Rim and Tire,
Standard ISR Brake Package and Bars replaced with the PM Rotors, Brakes & Controls,
HD Seat, has been replaced with a Custom "Carbon Fiber" Gun Fighter Seat, ONLY a handful
were Made (6 - 8). I guarantee you will never see another One (1) unless you see one of mine,
Turn Signals Upgraded to RED Led Bullet Style, More Ground Clearance than Stock Hellcat
Comfortable, Bars, Headlight & Digital Display Changed to Upgrade the Entire package..... 113 CU In S&S, 1853 CC, 118 HP, 126 FT LBS, Pulls like a Train, The Finest 240R Ever Made,
Custom Gloss Black Paint, 1 of 1, Custom Hand Painted Hellcat Logo and Lettering ON CF tank,
18" X 3.5 Performance Machine Front Wheel And 18" X 8" (240 MM) Rear Wheel with Matching
PM Brakes Front & Rear, PM Rotors and Controls, Auto Meter Gauges on Carlini Drag Bars,
With Custom Diamond Mirrors, Auto Meter Gauge Package, Custom Cushy Forward Controls,
Custom Billet High Intenstity Aluminum Headlight, Custom Red LED Bullet Turn Signals,
Solid Carbon Fiber Tank (Just Relined), Light Weight Carbon Fiber (or Fiberglass) Fenders
All Parts are Fully Polished, Billet Aluminum or SS parts, All aluminum Primary Housing,
All Aluminum S&S 5 Speed Gearbox (Andrews Gear Set) Indestructible, & Very Lightweight,
Primo Rivera Belt Drive Primary W Gates Belt, Including a Long lasting Primo Clutch Pack,
Pailoi 46 MM Inverted Front Forks with Compression & rebound adjustments,
Sport Bike Works Performance Custom Rear Shocks, Comfortable, Soft Ride (Big 240MM)
3" Chrome Moly Backbone Frame making for a Super Rigid Platform, NO Flex,
With Oil In the Frame, 5-1/2 Quarts Maximum for a cooler Running Motor,
Not a Ding or a Scratch, Stored in a climate Controlled Office for Over Ten Years,
NO Modifications or Item Alterations to this Custom Bike were Done by Me or Anyone Else,
It looks Like it Did as I Purchased IT, Other than Relining the Carbon Fiber Tank
510 LBS Dry, Will smoke any Harley or all Sport Bikes (light to Light) Except a Busa,
Final Cleaning, Battery, Oil and Gas will be installed 2 Days Before Delivery or Pickup,
I will help load the bike for your Freight Carrier, Door to Door Delivery is available for 1.00 Per Mile
Via Map Quest (in One Direction, Up to 650 Miles, IE: 550 Miles Less 300 Allowance = 250.00 Additional).
2016-08-09 04:57:26
Columbus, Ohio, United States
1
26000
-
2000 Custom Built Motorcycles Pro Street (2000)
WHY would anyone buy a 20,000 mile FED, for 20K, when for Half of that...... you can Have a Almost NEW (1205 Miles, W/ Bigger and Much Better Motor),
With a "Limited" Parts/Labor Warranty (YES, A Warranty ON A USED Bike)
This Bike is Priced Right, Have All Funds Ready Prior to Placing A Bid,
IF you Place A Bid, AND This Beautiful bike meets Reserve, YOU OWN IT...! "Picture of Bike with the Model is NOT a picture of the Bike For Sale"
2000 confederate America GT, Big Brother to the Hellcat, 120 CU IN Merch Motor, Stage II,
"Stored in a Heated And Cooled Environment for 10 Plus Years, Must Sell, Tired of Looking AT IT....
2016-06-28 05:00:02
Columbus, Ohio, United States
1
51000
-
2012 Custom Built Motorcycles Pro Street (2012)
Titled as a 2012 Homemade. Same as self-assembled or reconstructed or whatever your state may call it. Harley twin cam, five speed hd trans, stretched tanks etc.
2016-06-23 04:57:50
Columbus, Ohio, United States
4
6,750.00
-
Carolina Custom Chopper Pro Street Motorcycle Trades Considered (2007)
This is a home built, first build of a 2007 Custom Pro-Street completed in 2009. The Carolina Custom frame is stretched 8” over on the backbone and -4” on the down tube with a diameter of 1 3/8” steel tubing. The triple trees and front forks are at 52 degrees.
2013-09-24 02:55:40
Conway, South Carolina, US
700
10,901.00
-
2006 Custom Built Motorcycles Pro Street (2006)
2006 Coast to Coast Violator 330, s124 cu jn T&P vented, this bike was spared no expense when built, see pics, bikes in great shape, runs well, 330 rear tire, just had ignition done in Sturgus, had tank re-coated inside, all oils just changed. i removed the breather and added stacks which look much meaner in my opinion.
2016-06-25 04:54:08
Corpus Christi, Texas, United States
4
15,000.00
-
2007 Custom Built Motorcycles Pro Street (2007)
Time to sell this magnificent "Man Toy"
Our loss $$ your GAIN $$$
2007 Walz Hardcore Chopper/Pro Street
This is not your normal chopper or street bike. This is a custom built chopper/Pro street machine on a Walz (Germany) frame built by the creator of the drag style motorcycle frame and naming rights. WalzWerks motorcycles are made in Belgium and they are the prize possession of many Formula one race car drivers and many of the Go fast Hollywood crowd.
2016-07-17 04:53:54
Costa Mesa, California, United States
2
24379
-
One of a Kind, Drop Seat Hot Rods, Built to Order with Factory Title (2013)
2013 one of a kind drop seat hot rods by big Tony's Chopp Shop
Built by the mid-wests number one custom bike shop. We build the nations baddest custom motorcycles. We are a federaly liscensed manufacturer and issue titles with our bikes. These bikes pictured are examples of our latest in big wheel bikes from Mid level 18/21 chassis to our all out radical High End 20/23 chassis. Starting at 55k, these Bikes are 9 -10 foot long and start with a made for (b.t.c.s.) exclusive one off chassis. We start with a -1 in.
2013-10-13 22:28:09
100
60,000.00
-
Custom Bad Ass Bobber Chopper ProStreet Ultima 107 Rigid with Skull Flames 2008 (2008)
Bike Specs
it is a 34/4/1.5 kraft tech rigid frame.wide glide front end with 3 degree raked trees250mm avon venom rear tire21"x3" avon front wheelspoked rims107" ultima polished motor with 125 horse pwr to the rear wheel and 135ftlbs of tourquepolished 6 speed left side drive ultima trani3.35" polished ulitma belt drive with barnett clutch14" ape hangers on 3" risers42" straight pipesleft side chain drivespring solo seatcustom true fire paint with ghosted skullsall braided cablesforward controls
2013-10-15 00:01:41
Cumberland, Rhode Island, US
800
7,500.00
-
2004 Custom Built Motorcycles Pro Street (2004)
YOU ARE BIDDING ON 2004 PROSTREET CUSTOM ENGINE IS 08 S&S 120 CU IN. 6 SPEED TRANS W/ BELT DRIVE 3IN PRIMARY. AIR RIDE SUSPENSION .
2016-06-17 05:04:26
Cut Off, Louisiana, United States
5
20000
-
2001 custom motorcycle Fast Bike! Has Big Dog sticky seat for passenger (2001)
UMC Titanium 2001113 cui S&S motorJim's 5 Speed TransmissionThis bike runs great! It is very quick, and has always been very good on gas! Especially with the performance it has!This is a 12 year old bike and does have a paint chip or two from road debris and has the small scuff on the rear fender. To be completely honest about the mechanics of the bike it could use a new throttle cable and a front head gasket, but neither effect the running of the bike.
2013-10-23 00:16:48
1,200
10.00
-
2004 Custom Built Motorcycles Pro Street (2004)
Started this build in 2004,this is a Daytec style softtail frame 2 inch strech,2 inch rake.63 mm front end 2+,the top triple tree chrome lifted in one spot.The motor is 113 cubic inch Ultima,120 horse power,120 foot lbs of torque,show polished s&s super g carb.6 speed Daeil polished transmission 3 inch BDL open belt drive and clutch.21 inch Bayonet II polished front wheel,18 5.5 rear wheel.Matching rear chrome sprocket belt rear drive.This bike has all paper work for engine,frame,transmission and receipts,Must sell due to health issues,this comes with everything to complete Bike has all wiring,cables,bolts.Made seat pan would have to have the seat made,Bdl forward controls,Big Bear pipes,4 piston chrome brake calibers.1 1/2 drag bars.Custom Marble paint job.Everything is brand new, if you want a custom Motorcycle for a great price this is it..Just need probably a week of your time to complete.It has brand new Avon tires on it to 200 in the rear. Immediate DEPOSIT 500.00 DOLLARS no exceptions.This is a new Motorcycle that will turn heads,just wire,put cables on and ride. OVERSEAS SALES,Buyer responsible for all shipping and pick up.
2016-06-26 04:57:00
Diamond, Ohio, United States
0
47000
-
2006 Custom Built Motorcycles Pro Street (2006)
2006 Coast 2 Coast Tormentor 300TP 1246Spd Trans300 Rear
2016-08-09 04:57:30
Dighton, Massachusetts, United States
2
12,000.00
-
CoinDump - a new cryptocurrency based on a dump of cryptocurrencies. The rate of CD is growing every day. 50 CD and 0.00005 BTC for REGISTRATION https://coindump.biz/?ref=0110ce0e15d11860f5c787dd7668239a (1985)
CoinDump - a new cryptocurrency based on a dump of cryptocurrencies. The rate of CD is growing every day. 50 CD and 0.00005 BTC for REGISTRATION
https://coindump.biz/?ref=0110ce0e15d11860f5c787dd7668239a
2018-05-20 03:53:08
Dubai, Colorado, United States
9,223,372,036,854,775,808
01100151186057877668
-
145 cubic Inch S&S Tribute Motor Arlen Ness Y2K Rubber Mount (2005)
ARLEN NESS COMPONENT with a 145 ci S&S "Tribute" motor, Super G Carb housed in the ARLEN NESS RUBBER MOUNT Y2K FRAME. This frame/chassis is one of only a few that can hold the 145 ci monster, yet with a Pro Street geometry , 250 Avon rear tire, it rides and handle very well. Its truly amazing.
2013-09-03 14:52:07
999
11,000.00
-
Silver with custom paint job, drag transmission, drag clutch, one of a kind (1996)
I'm a private seller who has own the bike for seven years. Bike is in great condition, but looking to sell or trade to buy a mustang. It has inverted forks, modified beach bars, a brand new battery, high torque starter, Corbin two person seat, thunder header, compression release in the heads, Carlini racing mirrors, left hand belt drive, Super G carburetor, a brand new speedometer and tac, forward controls, LED headlights and taillights and LED lights under the frame and motor. The bike is 96 cubic inch with S and S.
2013-09-03 08:16:04
5,000
13,995.00
-
2008 Custom Built Motorcycles Pro Street (2008)
2008 SMW godfather 100 ci ultima polished el Bruto motor. 6 spd ultima chrome transmission 300 rear tire intergrated rear turn signals in foot pegs 3 inch BDL open primary Rick Futrell custom seat Martin bros daisy cutter exhaust
2016-08-15 05:00:24
Eaton, Ohio, United States
2
21000
-
2003 Route 66 (2003)
This soft tail was originally built by Route66 customs. It has a 100ci Rev Tech with a 6 speed trans. It has new 240 tire, PM brakes upgraded forward controls, hooker exhaust, ignition, coils, and belts. Only bad spot on bike is scrape on upper tree.
2013-10-18 00:15:07
1
6,100.00
-
2017 Custom Built Motorcycles Pro Street (2017)
This bike was just completed and still on all MSO`s I have every piece of paperwork to get titled in your state easily. If you had this built at a shop it would cost you well over 25k softail frame with MSo and fresh black powdercoat, s+s lower end with MSO and edelbrock topend 127ci with 125hp to the rear wheel! 5spd from Harley with mso and complete primary drive rivera pro clutch, 8in over raked trees and chrome wideglide an 21in spoker up front revteck blade 16in show chrome rear wheel and new 16in tire gloss black paint with ghost tribal flames, mild 16in apes....
2016-10-14 04:43:14
Egg Harbor Township, New Jersey, United States
3
18000
-
2000 Custom Built Motorcycles Pro Street (2000)
2000 Softail STINGRAY. I am the builder and only owner of this bike.
Special Construction, starts on a dime and will rip you off the seat if you're not holding on. Custom marbled paint including frame and matching swing arm.
2016-06-14 16:02:41
El Paso, Texas, United States
10
3,900.00
-
2003 Custom Built Motorcycles Pro Street (2003)
For sale is my 2003 Amen chassis works pro street softail this bike is not a bunch of parts thrown together just to make a bike it was built for speed and it was built to ride (and has been reading it will need paint and some other cosmetic work) built with top-of-the-line parts I am the former owner of full-blown custom cycles in Las Vegas Nevada and out of the hundreds of bikes I have owned and built this bike is one of the most comfortable to ride it has a 113 S&S super sidewinder A six speed transmission with a 4 inch open primary it also has a 250 rear tire too many custom parts to list this bike is for sale local auction will end when it sells please contact Dave at 443-485-7611 with any offers or questions thank you and good luck
2016-06-23 04:57:52
Elkton, Maryland, United States
4
46000