Pro Street Pro Street Motorcycles, page #2

Brand new build with all high quality parts. No corners were ever cut. 140ci ultima, primo 6 speed, primo open outer primary, 26" front tire, 300 rear.

Professionally built pro street big wheel. 140ci ultima motor, primo 6 speed trans, primo race belt drive. All quality parts.

2006 Coast 2 Coast Tormentor 300TP 1246Spd Trans300 Rear

2003 Custom motorcycle. 121 CI. TP Engineering Motor, Bdl open primary with custom billet cover,revtech 6 speed transmission, Custom Billet Wheels that almost look like chrome, 21in front wheel matching 15 in rear wheel, 230 rear tire, Custom Paint, This Bike runs perfect and is a real head turner.

111 S&S Motor and a 6 speed transmission.  With a 250 back tire.

THIS IS A UNIQUE CUSTOM BIKE.        IT HAS BEEN IN HOT BIKE MAGAZINE. MUTLI  1ST PLACE SHOW WINNER  NO EXPENSE WAS SPARED.

 Time to sell this magnificent "Man Toy" Our loss $$ your GAIN $$$ 2007 Walz Hardcore Chopper/Pro Street     This is not your normal chopper or street bike. This is a custom built chopper/Pro street machine on a Walz (Germany) frame built by the creator of the drag style motorcycle frame and naming rights. WalzWerks motorcycles are made in Belgium and they are the prize possession of many Formula one race car drivers and many of the Go fast Hollywood crowd.

Custom professional paint, 121 TP motor, chrome frame, ceramic coated exhaust by Frankie Serrano. Pictures do not do this bike justice, must see to appreciate. Has no speedometer or turn signals.

2004 Wicked Image Custom Pro Street Bike is one of a kind. Complete custom from ground up. Many many custom parts, wheels are one of a kind, frame is one of a kind custom.

I am selling my Special Construction Pro Street FXR...this thing is loaded! Chrome and or polished everything, 3" BDL Open Primary, belt driven, dry clutch, 4 speed tranny, new Progressive shocks put on last week. Super Stock Big Bore S&S EVO 88 with Super Stock Jugs and a super E carb, chrome spoked wheels, front and rear disc brakes...this is a must see if you are an FXR guy.

7 back bone stretch two down, 51 Deg. Rake, 300 rear tire, 1 off hand built rear fender with inlayed led tail light, Fat Katz gas tank, Extreme Machine rims, 127 ultima motor., BDL 3 1/2 primary, 6 gear trans., Custom paint by MNK in Chicago, 58 mm inverted front end, Stainless Creations exhaust ceramic coated insides, Dakota digital Speedo, Custom Ostrich seat,

2007 Paramount Custom Cycle-The Coupe, up for grabs. This bike is super clean in all ways. I sold my Harley and bought this bike because it is so well designed and built, beautiful as well but it's just a little too big for me.

Pro Street Frameworks, 124 cubic inch polished S&S engine, 6 speed Baker hydraulic transmission, air ride soft tail suspension, built-in air compressor, Performance Machine controls and wheels, 280 rear tire, very strong, high performance ride, black and chrome, Bill it for you open primary; $52,000 when new; condition of motorcycle on a scale of 1 to 5 is a 4, a "show stopper."

1998 PRO STREET SOFTAIL 1340- 80CICARLINI DESIGN HANDLEBARS5 SPEEDCUSTOM PAINT SS SUPER E* CARBURETOR 180 REAR TIRE COOL BIKE STEAL OF A DEAL..

This is a rare chance to buy a one of a kind super bike 152 cubic inches of all billet motor with a six speed and clutch built specifically for this powerful motor the oil is in frame  260 rear tire  has a couple chips from riding but very nice shape new battery and oil change 

This bike was just completed and still on all MSO`s I have every piece of paperwork to get titled in your state easily. If you had this built at a shop it would cost you well over 25k softail frame with MSo and fresh black powdercoat, s+s lower end with MSO and edelbrock topend 127ci with 125hp to the rear wheel! 5spd from Harley  with mso and complete primary drive rivera pro clutch, 8in over raked trees and chrome wideglide an 21in spoker up front revteck blade 16in show chrome rear wheel and new 16in tire gloss black paint with ghost tribal flames, mild 16in apes....

2013 Custom Built Road Glide.2013 4 point rubber mount touring frame with 113 inch twin cam "B" engine with 6 speed trans.,custom oil tank,custom oil cooler,virtually no vibration(better than the 2017 Harley's).Harley reaper wheels with Michelin rubber,Chrome everywhere,12 point stainless bolts EVERYWHERE.Race Tech fork kits ,Ohlins rear adjustable coil overs,2015 handlebars ,hydraulic Rivera primo clutch,Baker compensator and adjuster,Custom length headers with crossover,4 inch cvo mufflers with repack,Thundermax full ign. with o2 sensors,New screamin eagle case with MSO,4.060 cylinders bored .010 over with torque plates,Complete Darkhorse bottom end,(crank,rods,line bore,assemble)58mm throttle body,Feuling pump,plate,lifters,pushrods,s&s roller rockers,Dyno tuned to 113hp and 116 torque.Includes detachable backrest,chrome Crash bar,All paperwork and invoices on build,just inspected and registered for year in may. Really nice touring or cruiser,one of a kind,no disappointments here.

Kendall Johnson Pro Street built by Precision Cycle Works. S&S Pro Stock 124 cid engine with a 6 speed trans.   #8 of 50.  One owner with only 3,000 actual miles and all paperwork.  Price reduced.  MAKE ME AN OFFER. 

96" S&S enginepaucho framestretch tanksdyna single fire ignitionrevtech transmany ness partsPM brakes

Manufactured by Precision Cycle Works for Kendall Johnson number 8 in the series.  124 cid  S&S Engine with Primo 3" primary drive and Primo Riviera 6 spd trans.  Just 3000 miles on odometer.

No time to ride since opening a business after my second retirement and now my wife wants a divorce!  This bike was built especially for me.  I have another custom plus a bagger.  Didn't need to sell...Now I need to sell...opened another business three years ago and the bike has been barely ridden in almost two years, but has been kept in a heated garage.  Bike is insured for $55k.  My problems are you opportunities! I have an enclosed trailer and would be willing to deliver for expenses of going and coming within 500 miles.

No time to ride since opening a business after my second retirement and now my wife wants a divorce!  I have another custom plus a bagger and have thought about selling this one for several years until I ride it!  Didn't need to sell...Now I need to sell...opened another business three years ago and the bike hasn't been ridden in almost two years, but has been kept in a heated garage and on a battery tender.  This bike is insured for $55k.    My problems are you opportunities! I have an enclosed trailer and would be willing to deliver for expenses of going and coming within 500 miles.

2007 Pro Street made by RPM Custom Choppers. 96 S&S Super Stock engine, six speed transmission. I don't go many places without someone asking questions about this bike; it's an attention grabber  It rides and handles great at highway speeds.  This bike has been well maintained.   Email if you have any questions.

Do not let the bike of your dreams pass you by! This bike is custom built to look good and ride fast. Runs Great!

Up for your consideration is this custom 1997 GSXR 750, and when I say custom I'm not talking about some stickers I put on this bike, but this bike is custom from the ground up. 05 GSXR wheels, 05 tree's and forks, 05 rear swing arm, and rear shock, 06 GSXR 1000 engine, custom aftermarket muffler, Loud ass horn, 05 front signal lights, and after market brake light set up, and 06 wiring harness, and computer. New tires, new chain, and sprockets, new rear wheel extensions, custom paint just done, but there are some flaws in the paint so look at the pictures closely, but you'll never see them unless someone point them out to you.

2008 Independent Hard Life Chopper Motorcycle. S&S Motor, built by Kendall Johnson, Baker six xpeed, painted by Mike Learn,painter of the year. Whalz hard core of Germany 3 piece wheels.

2006 Custom Prostreet Chopper C4 - 4000 miles.  113 cubic inch Ultima.  Open belt primary, 250 rear tire, PM spun aluminum rims, Carlini handlebars, compression released heads, all aluminum is polished or chromed, too much to list.

2006 Coast to Coast Violator 330, s124 cu jn T&P vented, this bike was spared no expense when built, see pics, bikes in great shape, runs well, 330 rear tire, just had ignition done in Sturgus, had tank re-coated inside, all oils just changed. i removed the breather and added stacks which look much meaner in my opinion.

 For sale is my 2003 Amen chassis works pro street softail  this bike is not a bunch of parts thrown together just to make a bike  it was built for speed and it was built to ride (and has been reading it will need paint and some other cosmetic work) built with top-of-the-line parts I am the former owner of full-blown custom cycles in Las Vegas Nevada and out of the hundreds of bikes  I have owned and built this bike is one of the most comfortable to ride it has a 113 S&S  super sidewinder A six speed transmission with a 4 inch open primary it also has a 250 rear tire  too many custom parts to list this bike is for sale local auction will end when it sells please contact Dave at 443-485-7611 with any offers or questions thank you and good luck 

  Titled as a 2012 Homemade. Same as self-assembled or reconstructed or whatever your state may call it. Harley twin cam, five speed hd trans, stretched tanks etc.

Ron Finch custom turbocharged motorcycle. Built in 1994 at a cost of 45,000. Low Mileage (Approx.

Ron Finch custom supercharged motorcycle. Built in 1997 at a cost of 45,000. Low Mileage (Approximately 5000) .

YOU WANT TO STOP PEOPLE DEAD IN THEIR TRACKS? YOU DONT NEED A 100K CUSTOM TO DO IT... HERE IS A SUPER RARE BIKE IN INCREDIBLE CONDITION....WHAT YOUR LOOKING AT HERE IS A ORIGINAL "RON SIMMS" CUSTOM SOFTAIL NOT A REPLICA BUT A REAL RON SIMMS I CALLED AND SPOKE TO HIM MYSELF AND VERIFIED HE BUILT THIS BEAUTY. PAINT BY WORLD WORLD RENOWNED..

2003 Custom Softail. I have all the reciepts and Mso for this bike. Iowa Title.

Pro street Custom Motorcycle built in 2013, less than 5000 miles, always garage kept, 3oo back tire, LED lights, air ride, all chromed out! Definitely a head turner!!! Serious Inquires only!

2001 DONNIE SMITH CUSTOM CUSTOM Top Line Information Year: 2001 VIN: MVIN206691IND Make: DONNIE SMITH CUSTOM Stock: A1118 Model/Trim: CUSTOM Condition: Pre-Owned Engine: 0 cc Exterior: Purple Mileage: 5,246 Additional Photos* * * Click Photos to Enlarge * * * * * * Click Photos to Enlarge * * * Phone: (630)425-3237 Alt: (630)624-8303 DescriptionDONNIE SMITH CUSTOM!! DONNIE SMITH CUSTOM S&S MOTOR HYPERFORMANCE BIG JUGS 5-SPEED TRANS ONLY 5246 MILES!! PM CALIPERS CUSTOM 2 UP SEATS JOKER MACHINE CONTROLS OPEN BELT PRIMARY CUSTOM SKULL AIR BRUSHING   At our dealership we work very hard to accurately describe our vehicles through text descriptions and elaborate photos.

Call to work out details

YOU ARE BIDDING ON 2004 PROSTREET CUSTOM ENGINE IS 08 S&S 120 CU IN. 6 SPEED TRANS W/ BELT DRIVE 3IN PRIMARY. AIR RIDE SUSPENSION .

2000 Confedater HellCatThe Bike runs like and Drives Great.Was laid down by past owner and I dont have the time to redo the title.Please look at the pictures just has cosmetic damage to the forks, Brake master, Sidecover, Seats, etc,I was told the Motor is 127 in TP racing Motor ( but have no way of checking ( it runs like its is)I have two brand new tires for the bikeAlso have the Head light it coame with and Tech.The rear Passanger Seat was over $1000 aloneMilage is Unknown But I believe its around 5K Thanks for looking

Your browser does not support JavaScript.To view this page, enable JavaScript if it is disabled or upgrade your browser. Click Here. Double your traffic.

Very clean 2003 Custom softail prostreet 96 CUBIC INCH S&S engine5 speed trans200 mm rear tire 21 in front tire all chrome froward controls corbin solo seat Very quick bike$1000 deposit on bike, New owner responsible for pick up. 

2003 SOFTAIL CUSTOM BUILT  WITH STATE OF CONNECTICUT VIN CT39204  CLEAR CONNECTICUT STATE TITLE  ISSUED 2003 ,WITH LETTER OF CORRECTION . TITLE SIGNED IN 2ND  REASSIGNMENT IN ERROR . 88 CU S&S SUPER STOCK  EVO MOTOR , S&S SUPER E ,H/D 5 SPEED ,MILEAGE UNKNOWN ,SPEEDOMETER IS NOT WORKING CORRECTLY ,CURRENTLY  6,807 MILES ,  NACELLE CHROME FRONT END ,   EXCELLANT SHOW PAINT , NICE ENGINE CHROME, SCREAMIN EAGLE PIPES , ARLEN NESS BILLET CONSOLE , SPOKE RIMS , FRONT TIRE 60% TREAD , REAR TIRE 30% TREAD , CHIPPED REAR FENDER ,RECENTLY  TRADED IN AT HARLEY DEALER ,  RUNS AND DRIVES LIKE A FAT BOY , EBAY SHIPPING LINK INCLUDED IN LISTING , NO STORAGE OR DOCUMENT FEES , DEPOSITS ARE NON REFUNDABLE ,CALL JOHN T HUNTER MOTOR SALES 518 370-2227 FOR INFO 

2008 SMC Bad Boy Buell Conversion. Oil in frame design, hand forged tank, fenders, and frame. Has Axtell big bore kit.

One of a kind, Great bike, Rides and handles perfect, Runs great. This motorcycle has many features such as Daytec Pro Street Chassis American Suspension Springer 100CC Inch Revtec Polished Engine 6 Speed Polished Revtec Polished Transmission Martin Brothers Pipes Wicked Engine Intake Excel Controls Carolina Custom Wheels BDL 5" Open Primary All Custom Sheet Metal and Paint  

For Sale, clean 2008 Arlen Ness Lowliner. 124 S&S motor, Baker 6-speed RSD Transmission. Bike is in excellent shape and currently has 6800 miles on it.

PAUGCO FAT BOY FRAME, 55 mm MEAN STREET INVERTED FRONT FORKS, NESS HEADLITE, 1340 EVO BIG BORE, S&S CARB WITH POWER VALVE, 2"CUSTOM EXH, WIDE BDL OPEN BELT DRIVE, FINAL BELT DRIVE, THE BEST IN CONTROLS AND CHROME ALOT OF BLING. THIS ADJUSTABLE SOFT TAIL RIDES NICE AND PULLS LIKE A FREIGHT TRAIN WITH A VERY NICE SOUND AND THUMP TO HER. THE PAINT IS VERY GOOD, THE BLACK WITH BLUE AND GREEN GHOST FLAMES REALLY POP IN THE SUN LIGHT.

Customized Prostreet Chopper. 26 inch front with 300 rear tire. Complete head turner , one of a kind.

up for auction is an attention to detail professionally built custom,starting with pro one frame,jessie james stretched tanks ,worked fenders ,followed up with awesome paint work !powered by a 96 ci super stock engine with edelbrock heads ,s&s carb chrome rocker boxes ,Arleen ness primarys ,Russell braided lines and so on!transmission is a 5sp belt drive,wheeels by carrageworks 21"out front with new metzlers front and rear,rev tech calipers with new pads bike runs and sounds great  any questions feel free to ask thanks.being rode so milage will be different! bike is being sold as is !

You are viewing a super sweet sharp trike built by Saxon.Saxon is a company that builds a limited number of custom bikes a year in the USA.This is forsure a bike to ride or take to local bike shows.Trike is super nice with very little wear. If this is what you are after dont let this pass you up lots of money in the Bad Boy..... WE ARE POLARIS OF BENTON.

Custom fabricated front and rear fenders, custom LED rear lights and front blinkers. 7000 miles on engine, engine is bored, high compression pistons and cam. Diamond cut fins on motor.

Many extras 

2001 Pro Street Custom Pro -1 chassis and front end, S&S 113, Jim’s 6 spd with overdrive, PM rims, brakes, rotors and calipers,  Avon tires, RB Racing exhaust BDL belt drive, custom paint.  $10,000  Call 631-774-6306

2003 Kraft tech Pro Street, 124 in S&S, motor alone new is worth $10,000, digital speedometer, big back tire, short zoomie pipes, 7,zero miles. runs and rides excellent. awesome paint job.

2004 Custom Built Soft Tail. 107” S&S Motor. Dyno’d at 110 HP at rear wheel Jims 5 speed trans Rolling Thunder frame 230 rear tire RC Components Wheels Performance Machine Brakes Stainless Rotors New Front Tire New Battery Super Trap Exhaust 2 up seat with passenger pegs Powder Coated Frame – Silver Pearl Metallic Custom Paint with Flames   This is a beautiful custom built soft tail with a 107” S&S motor.

FOR SALE: 2006 BMC PRODUCTION CUSTOM BUILD MOTORCYCLE, ONLY 8000 MILES ORIGINAL HAS A REVTECH 100cc engine with MIkuni Carburetor, Lots of Chrome, Custom Paint, Spoke Rims with a 240 Rear Tire this bike has been garage kept and is in excellent running condition, asking $7500.00 or best offer, please contact us with any questions, Local Pick-Up Only

2006 custom built PRO STREET CHOPPER. Soft tail with only 8k miles. Best of everything with no expense spared.

2003 Chopper Works Mirage 250 Featured in Iron Horse Magazine 2005 (Magazine comes with bike) This is a true show bike and a show stopper. Features: Avon 250 Rear Tire 124 cubic inch  Total Performance Engine. http://tpengines.com/  (2032cc engine A LOT OF POWER AND FAST) Only 9k miles on bike, but just had new rings put in the bike to freshen up the top end!

Custom Built by Dirty Hands Choppers. Clear Maryland Title The complete build book is available online.... go to www(dot)dirtyhandschoppers(dot)com, click on "Projects" and scroll down until you get to "The Muell".

One of a kind 2007 RPM Custom motorcycle Low Dough,  96 S&S Super Stock engine, Six speed transmission. I cannot go many places without someone wanting to take photos and or ask questions about it. This bike is an attention grabber.

2011 Pro Street Custom Built Motorcycle Original Cost $45,000 Pro Street Frame Custom $10,000 Paint Job Edelbrock Engine Producing a lot of HP Mukuni Carb Custom Exhaust Custom Chrome Wheels with Brembo Disc Brakes Avon Tires Fully Adjustable Rear Air Shocks Boyce Open Belt Drive Everything Chromed Out   You are looking at a one of a kind custom built Pro Street Motorcycle. This bike cost in excess of $45K new. It is in showroom condition with no expense spared.